Pubblicato: Maggio 15, 2020
With the new V2+ software for servo pumps that integrates directly into the drive, Baumüller enables greater process reliability and improved process quality, for example on pressing and injection mold machinesWith the new V2+ software for servo pumps that integrates directly into the drive, Baumüller enables greater process reliability and improved process quality, for example on pressing and injection mold machinesThe servo pump solution from the Nuremberg-based drive and automation specialist Baumüller is an intelligent and energy-efficient drive system e.g. for presses and injection mold machines. With the new V2+ software package, Baumüller now offers more intelligent functions for process monitoring and process optimization. Thanks to years of intensive collaboration with mechanical engineers, Baumüller is able with its serve pump solution to significantly reduce the energy requirements of machines and systems, enabling relatively short cycle times with very low noise development and a high level of process precision. The combination of hydraulic power transmission together with[…]Leggi tutto...
Pubblicato: Maggio 06, 2020
With the new motor size 560, the Nuremberg-based drive and automation specialist Baumüller is opening up new areas of application for electric direct drive technologyWith the new motor size 560, the Nuremberg-based drive and automation specialist Baumüller is opening up new areas of application for electric direct drive technologyDemands for the lowest possible life-cycle costs cannot be met with maintenance-intensive transmissions and loss-prone standard motors or conventional hydraulic systems. This is why manufacturers of presses, shredders, extruders, shipbuilders and others are increasingly turning to direct drives. Their main advantage is that electric motors are largely maintenance-free, making them more cost-effective in operation than conventional drive systems.Maximum torque: 60,000 NmThe torque motors of the DST2 series are now also available in size 560, offering a maximum torque of up to 60,000 NmThe torque motors of the DST2 series are permanent-magnet multi-pole synchronous motors in water-cooled design and were previously available in sizes 135 to 400. With the[…]Leggi tutto...
Pubblicato: Aprile 14, 2020
Starting April, 2020 Steffen Horn is new Managing Director for Baumüller ChinaStarting April, 2020 Steffen Horn is new Managing Director for Baumüller ChinaThe two Chinese subsidiaries of the Baumüller Group Baumueller Automation (Suzhou) Co., Ltd. and Baumueller Automation Equipment Trading (Shanghai) Co., Ltd. have a new Managing Director. On April 1st, 2020 Steffen Horn took over the leadership from Mr. Fabian Krane after a two months transition period. "We would like to thank Mr. Krane for his excellent work and contribution to the very positive development of Baumueller China", says Andreas Baumüller, Managing Partner of the Baumüller Group.With the two subsidiaries, the Baumüller Group offers in China the complete range of drive and automation technology with sales, application, service and production. Baumüller started its steady growth in China in 2003. The company supports its customers with products, systems and services that cover the complete life cycle of industrial plants and machines as well as vehicles, ships[…]Leggi tutto...
Pubblicato: Febbraio 11, 2020
Dr. Michael Wengler is new COO at Baumüller Nürnberg GmbHSince January 2020, Dr. Michael Wengler has been contributing as part of management of Baumüller Nürnberg GmbH as the new COO. Together with CEO Andreas Baumüller and CFO Reinhold Rückel, Dr. Wengler manages the Nuremberg-based provider of drive and automation solutions.In his new position as Chief Operating Officer, Wengler is moving the company forward in its technical operations. "We are happy to have recruited a COO with industry experience and wish him success in his new position", says Managing partner Andreas Baumüller.Dr. Michael Wengler is the new COO of Baumüller Nürnberg GmbHLeggi tutto...
Pubblicato: Gennaio 07, 2020
Baumüller introduces stainless steel servo motor series HYG1 for processes with high hygiene requirementBaumüller introduces stainless steel servo motor series HYG1 for processes with high hygiene requirementsThe Nuremberg-based automation and drive specialist Baumüller has developed a new servo motor series for aggressive environments and for industries with very high demands on hygiene, cleanliness, and corrosion protection. The new HYG1 offers optimum hygienic properties with a high power density while simultaneously eliminating the need for space-consuming protective enclosures.The HYG1 motor series meets the highest demands in hygiene and cleanliness while simultaneously offering high compactness and power densityMachines in food processing, beverage filling, and the pharmaceutical and packaging industries must be quick and easy to clean. At the same time, bacterial colonies must never grow as a result of accumulated dirt or cleaning agents. Baumüller meets this requirement with the HYG1. Classified under the IP69K protection class, it is quick and easy to clean, thereby minimizing downtimes. The[…]Leggi tutto...
Pubblicato: Novembre 22, 2019
The new edition of the b maXX 5300 from the Nuremberg-based automation specialist Baumüller is now even more flexible and application-optimized.Baumüller presents the next generation of b maXX converters with new safety functionsThe new edition of the b maXX 5300 from the Nuremberg-based automation specialist Baumüller is now even more flexible and application-optimized. In addition, it features new safety functionalities that are especially beneficial for highly dynamic applications.With its three expansion levels, the new generation of the b maXX 5300 module system can now be adapted even better to the requirements of the respective application Flexible…With numerous hardware and software options, customers can now better adapt new devices to their application requirements. For example, the number of safe I/Os can be selected to suit the application and the serviceability of the devices can be adapted.…and safeIn the area of safety, pluggable modules are no longer the solution of choice for the new b maXX module systems;[…]Leggi tutto...
Pubblicato: Novembre 22, 2019
80% of the application is already pre-configured: With its pre-configured software package 3 AxisFlex, Baumüller has reduced the programming effort for controlling the motion of up to three servo axes80% of the application is already pre-configured: With its pre-configured software package 3 AxisFlex, Baumüller has reduced the programming effort for controlling the motion of up to three servo axesWith its 3 AxisFlex software package, Nuremberg-based automation specialist Baumüller is offering pre-configured system solutions for multi-axis applications that already include all basic functions and can be conveniently and easily adapted to the respective application. This greatly reduces development times so that new applications can be brought to market quickly.Baumüller's pre-configured software package 3 AxisFlex can greatly reduce the programming effort required for multi-axis applications such as plasma cutters, laser cutters, and robots for surface treatment3 AxisFlex includes two areas: the basic package and the 3D-axis coordinated motion basic library. The basic package features user-friendly visualization and wizard-guided[…]Leggi tutto...
Comunicati stampa (Inglese)
- Pubblicato: Luglio 17, 2014